Tusken Raider Audio Kit

Description

Introducing my latest audio kit, the SW Tusken Raider, with or without sound loop system with wireless control.

(NOTE VERY IMPORTANT): This sale is for a audio system only. Helmet NOT included!

Specifically made for the Tusken Raider helmets my audio system consists of one resin cast housing fitted with a 25mm 2w 98db speaker, and steel mesh to protect the speaker. Powered by a rechargeable audio amplifier this system along with an omni directional microphone completely resides inside your helmet. Made for the Tusken Raider, this kit is a must have if you want to enhance your cosplay experience.

The audio system amplifies your voice outside of the helmet allowing your friends, family or fellow troopers to hear you better. Another feature is the ability to import any audio (SW music, movie voice clips, etc) via a 3.5mm cable (you supply or sold separately) which is then played over the same speakers used by your voice.

(NOTE VERY IMPORTANT): For the audio system to function correctly your Tusken helmet MUST have a 1″+ hole behind the snout. This is where the speaker will reside. Most do but just in case, please contact me with any questions prior to purchasing. Shipping fees will not be refunded if the item is returned because of ordering errors.

The Audio System is Available in Two Versions:
With a Bluetooth receiver and 8gb MP3 player with installed 501st Tusken Raider audio loops $249.99
Or without (Bluetooth receiver and 8gb MP3 player with installed 501st Tusken Raider audio loops) $149.99

The Bluetooth version allows you play and pause Tusken audio loops (voice clips) in between actual amplified audio transmission.
The non-Bluetooth version simply amplifies your voice outside the helmet WITHOUT the Tusken sound loops. Note: This version still allows you add the Bluetooth components later, or use your own.

What You’ll Receive (Bluetooth Version):
One (2w, 95db) water proof speakers, speaker harness with connectors
One audio harness with a black 3.6mm right angle audio jack
One 7.4vdc rechargeable amplifier and wall charger
One Omni-directional microphone (microphone type may vary)
Four swatches of black sealing foam with adhesive to seal and insulate speaker harness
Installation and operating instructions
Bluetooth Receiver with charge and audio transfer cables along with operating instructions
Bluetooth MP3 player with 8gb and installed 501st Tusken Audio loops. Player also comes with charge cable and operating instructions.

What You’ll Receive (Non-Bluetooth Version):
One (2w, 95db) water proof speakers, speaker harness with connectors
One audio harness with a black 3.6mm right angle audio jack
One 7.4vdc rechargeable amplifier and wall charger
One Omni-directional microphone (microphone type may vary)
Four swatches of black sealing foam with adhesive to seal and insulate speaker harness
Installation and operating instructions

Shipping: Items will be safely wrapped and shipped via USPS Priority Flat Rate mail unless specified otherwise.

A video demonstration is on the way.

Processing Information: This item is custom made and is built at the time of purchase. Processing times may take 3+ days prior to shipping. I work very hard to get the item out as promptly as possible but life happens. If you have any questions regarding this please contact me prior to purchase.

Holiday Ordering: Orders placed during most major US holidays may be delayed by 3-5 business days.

Thank you